Epson ET-M3140 Series - Fax Settings; Before Using Fax Features; Connecting to a Phone Line; Compatible Telephone Lines

Fax Settings
Before Using Fax Features
Set up the following to use the fax features.
❏ Connect the printer correctly with the phone line and, if necessary, with a phone
❏ Complete the Fax Setting Wizard, which is required to make basic settings.
Set the following as necessary.
❏ Contacts registration
❏ User Settings that
dene
default values for Fax menu items
❏ Report Settings to print reports when faxes are sent or received
Related Information
& “Connecting to a Phone Line” on page 41
& “Making the Printer Ready to Send and Receive Faxes (Using Fax Setting Wizard)” on page 44
& “Making Settings Individually for Printer's Fax Features” on page 46
&
“Menu Options for Fax Settings” on page 51
&
“Managing Contacts” on page 33
&
“Menu Options for User Settings” on page 39
&
“Report Settings Menu” on page 53
Connecting to a Phone Line
Compatible Telephone Lines
You can use the printer over standard analogue telephone lines (PSTN = Public Switched Telephone Network) and
PBX (Private Branch Exchange) telephone systems.
You may not be able to use the printer with the following phone lines or systems.
❏ VoIP phone line such as DSL or
ber-optic
digital service
❏ Digital phone line (ISDN)
❏ Some PBX telephone systems
❏ When adapters such as terminal adapters, VoIP adapters, splitters, or DSL router are connected between the
telephone wall jack and the printer
Connecting the Printer to a Phone Line
Connect the printer to a telephone wall jack using an RJ-11 (6P2C) phone cable. When connecting a telephone to
the printer, use a second RJ-11 (6P2C) phone cable.
User's Guide
Fax Settings
41