Epson ET-M3140 Series - Paper Jams; Paper Feeds at a Slant; Ejected Paper Falls from the Output Tray; Paper Is Ejected During Printing

Related Information
& “Environmental Specications” on page 177
& “Paper Handling Precautions” on page 21
& “Available Paper and Capacities” on page 19
& “List of Paper Type” on page 28
Paper Jams
Load paper in the correct direction, and slide the edge guides against the edges of the paper.
Related Information
& “Removing Jammed Paper” on page 143
& “Loading Paper in the Paper Cassette” on page 22
Paper Feeds at a Slant
Load paper in the correct direction, and slide the edge guides against the edges of the paper.
Related Information
& “Loading Paper in the Paper Cassette” on page 22
Ejected Paper Falls from the Output Tray
If ejected paper falls from the output tray, slide out the stopper to prevent the paper from falling.
Paper is Ejected During Printing
When you load letterhead paper (paper on which information such as the sender's name or corporation name are
pre-printed in the header), select Letterhead as the paper type setting.
Original Does Not Feed in the ADF
❏ Use originals supported by the ADF.
❏ Load originals in the correct direction, and slide the ADF edge guides against the edges of the originals.
❏ Clean the inside of the ADF.
User's Guide
Solving Problems
151