Epson ET-M3140 Series - Cannot Send Faxes; Cannot Send Faxes to a Specific Recipient; Cannot Send Faxes at a Specified Time

& “Uninstalling Applications” on page 139
& “Installing Applications” on page 138
Cannot Send Faxes
❏ Set up the header information for outgoing faxes on the control panel. Some fax machines automatically reject
incoming faxes that do not include header information.
❏ If you have blocked your caller ID, unblock it. Some phones or fax machines automatically reject anonymous
calls.
❏ Ask the recipient if the fax number is correct and the recipient's fax machine is ready to receive a fax.
Related Information
& “Basic Settings Menu” on page 53
& “Cannot Send or Receive Faxes” on page 167
Cannot Send Faxes to a
Specic
Recipient
Check the following if you cannot send faxes to a specic recipient due to an error.
❏ If the recipient machine does not pick up your call within 50 seconds
aer
the printer has
nished
dialing, the
call ends with an error. Dial using a connected telephone to check how long it takes before you hear a fax tone. If
it takes more than 50 seconds, add pauses aer the fax number to send the fax. e is used to enter pauses.
A hyphen is entered as the pause mark. One pause is about three seconds. Add multiple pauses as needed.
❏ If you have selected the recipient from the contacts list, verify that the registered information is correct. If the
information is correct, select the recipient from the contacts list, tap
> Edit, and then change Fax
Communication Mode to Slow(9,600bps).
Related Information
& “Sending Faxes Dialing from the External Phone Device” on page 94
& “Managing Contacts” on page 33
& “Cannot Send or Receive Faxes” on page 167
Cannot Send Faxes at a Specied Time
Set the date and the time correctly on the control panel.
Related Information
& “Sending Faxes at a Specied Time (Send Fax Later)” on page 95
& “Basic Settings Menu” on page 53
User's Guide
Solving Problems
169