Pages are Blank or only a Small Amount of Text is Printed on the
Second Page in Received Faxes
You can print on one page by using the Delete Print Data Aer Split feature in Split Page Settings.
Select Delete Top or Delete Bottom in Delete Print Data
Aer
Split, and then adjust
reshold
. Increasing the
threshold increases the amount deleted; a higher threshold gives you a higher possibility of printing on one page.
Related Information
&
“Print Settings Menu” on page 52
Other Faxing Problems
Cannot Make Calls on the Connected Telephone
Connect the telephone to the EXT. port on the printer, and pick up the receiver. If you cannot hear a dial tone
through the receiver, connect the phone cable correctly.
Related Information
& “Connecting Your Phone Device to the Printer” on page 43
Answering Machine Cannot Answer Voice Calls
On the control panel, set the printer's Rings to Answer setting to a number higher than the number of rings for
your answering machine.
Related Information
& “Basic Settings Menu” on page 53
& “Making Settings to Use an Answering Machine” on page 48
Sender's Fax Number Not Displayed on Received Faxes or the
Number Is Wrong
e sender may not have set the fax header information or may have set it incorrectly. Contact the sender.
Other Problems
Operation Sounds Are Loud
If operations sounds are too loud, enable Quiet Mode. Enabling this feature may reduce printing speed.
User's Guide
Solving Problems
172
To Next Page
Loading...
Need help?
General