Faxing
Before Using Fax Features
Check the following before you start using the fax features.
❏
e
printer and the phone line, and (if necessary) the phone machine are connected correctly
❏ Fax basic settings (Fax Setting Wizard) is complete
❏ Other necessary Fax Settings are complete
See "Related Information" below to make settings.
Related Information
& “Fax Settings” on page 41
Sending Faxes Using the Printer
Sending Faxes Using the Control Panel
Related Information
& “Sending Faxes Automatically Using the Control Panel” on page 92
Sending Faxes Automatically Using the Control Panel
You can send faxes by entering fax numbers for recipients on the control panel.
Note:
When sending a fax in monochrome, you can preview the scanned image on the LCD screen before sending.
1. Place the originals.
You can send up to 100 pages in one transmission; however depending on the remaining amount of memory,
you may not be able to send faxes even with less than 100 pages.
2. Select Fax on the home screen.
3. Specify the recipient.
You can send the same monochrome fax to up to 100 recipients. However, a color fax can only be sent to one
recipient at a time.
User's Guide
Faxing
92
To Next Page
Loading...
Need help?
General