Epson GT-30000 - Page 50

44
Installing the Software
5. Follow the instructions on the screen to
install EPSON TWAIN HS. When
installation is complete, you see the
window on the right. Make sure
SCSI
is
selected and
GT-30000
appears in the
Scanner Selection list.
6. Click
Test
to check the connection. If the
scanner software is installed correctly, you
see
Status: Device Ready
under Scanner
Information. Click
OK
to close the
window.
You can test your scanner connection at
any time. (Double-click the
EPSON
TWAIN HS
icon in your Windows
Control Panel to open the EPSON
TWAIN HS window. Then click the
Test
button.)