Epson RC700-A - How to View the Alarm Information

Maintenance 6. Alarm
140 RC700 / RC700-A Rev.23
6.1.1.2 Controller Battery
The controller battery is automatically configured at the first connection with the EPSON
RC+7.0 after upgrading to the firmware version 7.1.0.x and later.
If you are using the controller before the version upgrade, there may be a difference in the
alarm information. In such case, edit the alarm information. For details on the alarm
information editing, refer to Maintenance 6.1.3 How to Edit the Alarm Information.
6.1.2 How to View the Alarm Information
The configured alarm information can be checked in the EPSON RC+ 7.0.
(1) Select the EPSON RC+ 7.0 menu-[Tools]-[Maintenance] to display the [Controller
Tools] dialog box.
(2) Click the <Controller Alarms> button and display the [Controller Alarms] dialog
box.
There are three states of the alarm.
Display
Status
OK
An alarm is configured. An alarm is not occurring.
Expired
An alarm is occurring. Replacement is required.
Not set
An alarm is not configured.

NOTE

NOTE