Epson RC700-A User Manual

Safety 3. Installation
RC700 / RC700-A Rev.23 29
3.3.2 AC Power Cable
WARNING

Make sure that operations are done by a qualified personal.

Be sure to connect the earth wire (green/yellow) of the AC power cable to
the
earth terminal of the factory power supply. The equipment must be grounded
properly at all times to avoid the risk of electric shock.

Always use a power plug or a disconnecting device
for power connecting cable.
Never connect the Controller directly to the factory power supply.

Select the plug or a
disconnecting device which conform safety standards for
nations.
Make sure to insert the plug of the AC power cable firmly when connecting to the
Controller.
Item Specification
AC power wire (2 cables)
Black, Black
or Black, White
Ground wire Green / Yellow
Cable length 3 m
Terminal
M4 round solderless terminal

Epson RC700-A Specifications

General

Brand	Epson
Model	RC700-A
Category	Controller
Language	English