Epson RC90 User Manual

2. Installation
RC700 / RC90 Option Fieldbus I/O Rev.14 125
When you change the input/output size of PROFIBUS-DP slave module, you need to
change the input/output size of the slave information registered in the Fieldbus master
device.
Use the window below to change the input/output size of the slave information
registered in the Fieldbus master device by the applicomIO console application.
16 Bytes Out Output : 20 Bytes
4 Bytes Out
16 Bytes In Input : 20 Bytes
4 Bytes In

NOTE

Epson RC90 Specifications

General

Brand	Epson
Model	RC90
Category	Controller
Language	English