Epson RC90 User Manual

2. Installation
RC700 / RC90 Option Fieldbus I/O Rev.14 165
4. Describe an example to set the master and the slave as the setting below.
Setting item
Value
Address configuration
Fixed address
Master IP address
192.168.0.2
Slave IP address
192.168.0.3
Subnet mask
255.255.255.0
Input Bytes
32
Output Bytes
32
5. Start up the PC.
6. Select the Start menu-[SYCON.net] and execute it.

Epson RC90 Specifications

General

Brand	Epson
Model	RC90
Category	Controller
Language	English