Epson RC90 User Manual

2. Installation
RC700 / RC90 Option Fieldbus I/O Rev.14 175
29. Configure [IP Settings] and click <Apply>.
(Ex.) IP Address: 192.168.0.2 (Fixed Addresses)
30. Select [Configuration]-[Scanlist].
Select the [Activate] check box of the slave device.
31. Configure [IP Settings] and click <OK>.
(Ex.) IP Address: 192.168.0.3 (Fixed Address)
32. Close the [Configuration] dialog box.

Epson RC90 Specifications

General

Brand	Epson
Model	RC90
Category	Controller
Language	English