Epson RC90 - Page 69

2. Installation
RC700 / RC90 Option Fieldbus I/O Rev.14 57
4. Describe an example to set the master and the slave as the setting below.
Setting item
Value
Master MACID
0
Slave MACID
1
Baud Rate
500 kbps
Slave Input Bytes
20 bytes
Slave Output Bytes
20 bytes
5. Start up the PC.
6. Select the Start menu-[SYCON.net] and execute it.
7. Set a Confirm password of SYCON.net.
Click <OK>.
Be careful not to forget the Confirm password.