Epson SC-F9200 series

SC-F9200 Series Revision B
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 218
SE Group Confidential (Related Staff Only)
3.4.6.8 Driven Roller Assy
1. Move the Media Loading Lever to the rear side, and set it to the release position.
2. Open the Front Cover.
Figure 3-168. Removing the Driven Roller Assy (1)
3. Put paper at the position of remove Driven Roller Assy.
Figure 3-169. Paper position
C A U T I O N
 Do not scratch the PF Roller with the shaft of the Driven Roller
Assy.
 Do not touch the Driven Rollers with bare hands.
Front Cover
Media Loading Lever
C A U T I O N
Paper
Put paper between
Platen and Driven
Roller Assy, so as
not to damage Platen
or lose parts.
Platen
Driven Roller Assy