SC-F9200 Series Revision B
MAINTENANCE Cleaning 380
SE Group Confidential (Related Staff Only)
4. Wipe off any ink that adheres to the areas as indicated by the arrows.
x
Figure 5-11. Cleaning the Print Head
5. Close the Left Maintenance Cover.
WIPER
1. Open the Right Maintenance Cover.
2. Remove the wiper while holding the wiper by the attachment point, tilt it left and
lift it out.
Figure 5-12. Removing the Wiper
Use a cleaning stick to clean between the nozzles.
Make sure you do not press too hard on the nozzles.
make sure you move the cleaning stick in one direction; do not
move it back and forth.
After cleaning
Before cleaning