Epson STYLUS 3000 Service Manual

EPSON Stylus COLOR 3000
Rev. A
5-
3
Table 5-3. LED Error Status and Solutions
Printer Status Power Pause
Paper
Out
Ink
End
Media
Type
Solution
Power on On
    
Data proceeding Blinks
 
Paper Out
 
On
 
After loading paper, press the
Pause button and then press
the Load/Eject button.
Paper Jam

Blinks

After removing paper, press the
Pause button and then press
the Load/Eject button.
Print ready

On
   
During ink sequence

Blinks
 
No cartridge or ink
end
  
On *
1

Replace the ink cartridge.
Ink low

B  *
1

Have a new cartridge ready.
Fatal error Blinks
   
Turn off and back on the printer.
Release lever error

Blinks
Set the lever back to the
previous position and eject the
loaded paper. Then set the lever
to the appropriate position for
the selected type of paper.
Maintenance
requested
Blinks Blinks Blinks On*
2
Blinks
Replace the waste ink drain
pads and perform 
reset. (See Section 1.4.3 and
Section 3.2.9.)
Reset 
Timer  reset,
 Clear
All go on for 1 second.

∗1: Corresponding Ink End LED indicator goes on.
∗2: All Ink End LED indicators go on.

Epson STYLUS 3000 Specifications

General

Brand	Epson
Model	STYLUS 3000
Category	Printer
Language	English