Epson Stylus Photo R2000s Series User Manual

EPSON Stylus Photo R1900/R2880/R2000/R2000s/SC-P400 Series Revision I
Disassembly And Assembly Disassembling the Printer Mechanism 100
4.4.5 Carriage Shaft / Carriage Unit
1. Remove the Printhead / CSIC Assy. (p.94)
2. Remove the CR Scale. (p.92)
3. Remove the LED Board. (p.88)
4. Remove the APG Assy. (p.91)
5. Rotate the PG Cam (Right) to adjust its positions other than PG++ downside.
Figure 4-67. Adjusting the PG Cam
 Attach the Label, Ink Position;B at the position in the figure
below.
Figure 4-66. Attaching the Label, Ink Position;B
A D J U S T M E N T
R E Q U I R E D
After replacing the Printer Mechanism, always make the required
adjustments referring to the following.
•“Chapter 5 Adjustment (p.139)”
6mm
2mm
Label, Ink Position;B
PG Cam (Right)

Epson Stylus Photo R2000s Series Specifications

General

Brand	Epson
Model	Stylus Photo R2000s Series
Category	Printer
Language	English