Epson Stylus Photo R2000s Series - Page 206

Stylus Photo R1900/R2880/R2000/R2000s/SC-P400 Series Revision I
SC-P400 Series Errors/Fatal Errors and Remedies 206
Motor drive
time error
CR (PID) driving
time over error
D1H Main board failure
PF (PID) driving time
over error
D3H Main board failure
ASF driving time
over error
D5H Main board failure
PUMP driving time
over error
D6H Main board failure
APG driving time
over error
D7H Main board failure
Factory
command
error
Error due to EERPM
verify command
30H -
Printhead
error
Transistor
temperature error
40H Main board failure
X-Hot detect error
before printing start
41H Printhead failure, Main board failure
X-Hot detect error
after flushing
42H Printhead failure, Main board failure
Head temperature
error
43H Printhead failure, Main board failure
Head error 44H Communication error between
Printhead and Main board has occurred
[Remedies]
1. Update the Firmware.
2. Confirm the connection with Head
FFCs.
3. Replace the Printhead, Head FFC
or Main board.
Error Contents
Error
Code
Failed Parts/Remedies
Sequence
error
CR home position
seek error
50H Paper jam, foreign object, deformation
of the main frame
CR unlock
confirmation error
51H Paper jam, foreign object, deformation
of the main frame
CR lock reset
confirmation error
52H Paper jam, foreign object, deformation
of the mainframe
PF/ASF reset error 53H ASF sensor failure, ASF motor failure
LD Roller reset error 54H ASF sensor failure, ASF motor failure
Sensor error PW Sensor failure
error
60H PW sensor failure, Main board failure
PW Sensor foreign
object detection error
61H PW sensor failure, Main board failure
CDR Sensor 62H Failure of the sensor for the front tray
APG error APG specified
position drive error
70H APG Unit failure (APG sensor failure,
APG motor failure)
APG reset error 71H APG Unit failure (APG sensor failure,
APG motor failure)
APG drive error due
to factory commands
72H -
Mechanism
Unit error
Mechanism Unit
abnormal error
73H Mechanism Unit failure.
[Remedies]
1. Cleaning in the printer (Paper dust,
smeared with ink) (p.164)
2. Replace the Printer Mechanism
(p.98)
Ink device
error
Ink device error B0-CFH Ink cartridge failure, CSIC terminal
failure, CR contact module failure,
Main board failure
Circuit error Circuit error (include
blowout of a fuse)
80H Main board failure
Error Contents
Error
Code
Failed Parts/Remedies