Stylus Photo R1900/R2880/R2000/R2000s/SC-P400 Series Revision I
SC-P400 Series Adjustment 230
MAINTENANCE MENU
To display the maintenance menu, click the [Maintenance] button on the main
screen.
Figure 9-21. Maintenance menu
x
Table 9-13. Details of the maintenance menu
Item Description
(1) Main screen button Goes back to the main screen.
(2) Nozzle check button Prints a nozzle check pattern.
(3) Head cleaning button
Select a cleaning level among CL1, CL2, CL3, and
CL4 and run it. (Level selection available only in the
service mode. Basically use CL1, and if not
improved much, raise the level and try again.)
(4)
Restore Default Calibration
button
Overwrite the data in the User Color ID area back to
the saved data in the Production Color ID area.
To Previous Page
Loading...
