Epson Stylus Pro 9900 - Page 120

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
TROUBLE SHOOTING Remedies for Error Messages 120
Confidential
52 SpectroProofer ERROR
REFER TO THE MANUAL TO FIND OUT HOW
TO SOLVE THE PROBLEM
NN
*NN is the error number.
See 3.4 “Remedies for Error Messages related to SpectroProofer/Auto Take-up Reel” (See P.123).
53 SProofer DISCONNECTED
SpectroProofer IS DISCONNECTED
DO YOU CONTINUE?
NO
YES
The SpectroProofer is not connected to the printer properly. Select NO, and then turn the printer off, and then connect the
SpectroProofer to the printer properly. If you select YES, the printer
continues printing.
The SpectroProofer is not recognized. Check the connection between the Mount Sensor and the Main Board
Assy.
Replace the Mount Sensor with a new one. (See P.338)
54 DEVICE ALIGNMENT
ADJUSTMENT NOT COMPLETE
The initial settings have not been made for the
SpectroProofer.
Refer to the user’s guide to make initial settings to the SpectroProofer.
55 ILS20EP DISCONNECTED
ILS20EP IS DISCONNECTED
DO YOU CONTINUE?
NO
YES
The color measurement device (ILS20EP) is not connected
properly.
Select NO, and turn the printer off. Then re-connect the color
measurement device (ILS20EP) properly. If you select YES, the printer
continues printing.
56 MAINTENANCE REQUEST
NNNN
*NNNN is the error number.
See 3.4 “Remedies for Maintenance Requests” (See P.129).
MAINTENANCE REQUEST
CODE NNNN
REFER TO THE MANUAL
*NNNN is the error number.
No. Message on LCD Description Remedy/Points to be checked