Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
ADJUSTMENT Overview 358
Confidential
5.1.5 Service Program Basic Operations
This section describes the basic operations of the Service Program.
System Requirements
OS: Windows XP, Vista
Interface: USB, Network
Startup
1. When double-clicking the “ServProg.exe”, the screen asking if you want to carry
out the NV-RAM BACKUP appears.
2. If Yes is selected, the NV-RAM BACKUP UTILITY will start up; If No is
selected, the Service Program Menu screen will appear.
3. Select the printer you want to adjust from the model drop down selection list, and
start the adjustment.
Figure 5-1. Service Program Menu
C A U T I O N
The Service Program includes some adjustment items which
should not be performed at on-site service. Be sure not to
perform any adjustments that are not described in this manual
at on-site service.
Save the Service Program on the desktop or directly under the
C drive. If the storage location is deep in the hierarchy, some
program tools may not work correctly.
C H E C K
P O I N T
Adjustment items differ between Epson Stylus Pro 7900/7910/9900/
9910/9890/9908/7890/7908 and Epson Stylus Pro 7700/7710/7700M/
7710M/9700/9710 and Epson Stylus Pro WT7900/WT7910, but the
used Service Program is the same. You can select and execute the
adjustments for each model by selecting your printer from the
model drop down selection list.
C H E C K
P O I N T
When adjusting Epson Stylus Pro 7700M/7710M, select “Epson
Stylus 7700/7710” from the model drop down menu.
To Next Page
Loading...
