Epson Stylus Pro 9900 - Auto Take-Up Reel

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 313
Confidential
4.4.7 Auto Take-up Reel
4.4.7.1 Take-up Reel Cover
1. Remove the two screws that secure the Auto Take-up Reel.
A) Silver, Phillips, Pan S-tite with S.W & P.W. M4x10: two pieces
2. Hold up the Auto Take-up Reel to disengage the hook, and remove the Auto Take-
up Reel.
3. Remove the four screws that secure the Take-up Reel Cover, and remove the
Take-up Reel Cover from the Auto Take-up Reel.
B) Black, Phillips, Pan P-tite M3x10: four pieces
4. Disengage the six hooks that secure the Panel Cover from inside, and remove the
Panel Cover from the Take-up Reel Cover.
Figure 4-170. Removing the Auto Take-up Reel
Figure 4-171. Removing the Take-up Reel Cover
A
B
Hook
Take-up Reel Cover
Auto Take-up Reel
Take-up Reel Cover
Panel Cover
Hook