Epson Stylus Pro 9900 - Menu Mode Settings

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
PRODUCT DESCRIPTION Control Panel 58
Confidential
1.5.1 Menu Mode Settings
Table 1-8. Menu Mode Settings List
Top Menu Menu Item
Settings
(shaded one is the default)
Explanation
Applied
model
Pro 7900/7910/9900/9910/9890/9908/7890/7908
Pro 7700/7710/7700M/7710M/9700/9710
Pro WT7900/WT7910
PRINTER SETUP
PLATEN GAP
NARROW
Sets the platen gap (gap between the printhead and the platen).
When the “Others” is selected in the PAPER TYPE of the CUSTOM PAPER menu, the platen gap designated at
the CUSTOM PAPER menu has a priority over the setting made here. Refer to "PG Settings List" on page 71.
√√√
STANDARD
WIDE
WIDER
WIDEST
PAGE LINE
ON Sets whether to print a page line (line for manual cutting) on roll paper or not. The page line is printed when ON
is selected.
The vertical line may be printed when the roll paper width that is set in the printer driver is smaller than the
width of the roll paper that is loaded in the printer. This setting is available for roll paper only.
√√√
OFF