Epson Stylus Pro 9900 - Maintenance Mode

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision H
PRODUCT DESCRIPTION Control Panel 73
Confidential
1.5.2 Maintenance Mode
The maintenance mode allows you to change the environmental settings such as
language and unit settings to be displayed, or to return the all settings to their default.
The user can also access this mode.
HOW TO START & QUIT
1. While holding down the [Pause/Reset] button, turn the printer on.
2. Turn the printer off to quit the maintenance mode.
MAINTENANCE MODE MENU LIST
Note : If this menu is not displayed in Epson Stylus Pro 7900/7910/9900/9910, update the firmware to the
latest. This menu is added and the setting becomes available after updating.
Menu Item
Settings
(shaded one is the
default)
Explanation
LANGUAGE
JAPANESE
Selects the language used for the control panel
display.
ENGLISH
FRENCH
GERMAN
ITALIAN
PORTUGUE
SPANISH
DUTCH
KOREAN
CHINESE
LENGTH UNIT
METRIC
Selects the unit of length to be used for
various length information.
FEET/INCH
TEMPERATURE
UNIT
°C
Selects the unit of temperature displayed on
the LCD panel.
F
ROLL PAPER
TENSION
1
Specifies the maximum value of Roll Paper
Tension.
1: Low tension
5: High tension
2
3
4
5
SS CLEANING
EXECUTE
Runs a supersonic head cleaning.
DEFAULT PANEL
EXECUTE
Returns the all settings made by the control
panel to their default.
AUTO CLEANING
TIMES *
1
Sets the number of cleanings when nozzle
clogging is detected at auto nozzle check.
2
3
CUSTOM
0 - 255
Stores custom settings.