Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
DISASSEMBLY & ASSEMBLY Overview 182
Confidential
4.1.5.2 Identification method for the parts/components between models
This section describes differences of components between Epson Stylus Pro 7900/7910/9900/9910, Epson Stylus Pro 7700/7710/9700/9710, Epson Stylus Pro 7700M/7710M,
Epson Stylus Pro WT7900/WT7910 and Epson Stylus Pro 7890/7908/9890/9908 (only for main parts in different shapes).
Table 4-2. Differences
Part name Identification
Epson Stylus
Pro 7900/7910/
9900/9910
Epson Stylus
Pro 7700/7710/
9700/9710
Epson Stylus
Pro 7700M/
7710M
Epson Stylus Pro
WT7900/WT7910
Epson Stylus Pro
7890/7908/9890/
9908
Illustration
PRESSURIZING
PUMP ASSY
TUBE,
PRESSURIZIN
G, RIGHT, ASP
The number of tubes
differs. As seen from the
rear, the following
differences exist.
There is a tube to
the ink cartridge
holder on the
right.
There is no tube
to the ink
cartridge holder
on the right.
There is no tube
to the ink
cartridge holder
on the right.
There is a tube to
the ink cartridge
holder on the right.
There is a tube to
the ink cartridge
holder on the right.
SELECTOR, UNIT,
ESL, ASP
Identify your model by
checking if the ink
selector system exists.
Yes No No Yes Yes
Above-
mentioned tube
* The figure is for Epson Stylus Pro 7900/7910/9900/9910.
Location of the ink selector
* The figure is for Epson Stylus Pro 7700/7710/9700/9710.
To Next Page
Loading...
