Epson Stylus Pro 9900 - Ink System Mechanism

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
DISASSEMBLY & ASSEMBLY Disassembly Flowchart 199
Confidential
INK SYSTEM MECHANISM
NOTE * : Maintenance Tank L is only for Epson Stylus Pro 9700/9710/9900/9910/9890/9908.
START
“4.4.2.4 IC Cover (L/R) & IC Shaft
Cover (L/R)” (p206) (L only)
“4.4.6.6 Ink Cartridge Holder L”
(p284)
“4.4.2.8 Left Cover” (p211)
“4.4.6.12 Ink Tube R” (p306)
“4.4.2.6 Maintenance Tank (L/R)”
(p208) (L only*)
“4.4.2.15 Rear Cover” (p220)
“4.4.6.4 Pressurizing Unit” (p275)
“4.4.2.1 Control Panel” (p203)
“4.4.2.4 IC Cover (L/R) & IC Shaft
Cover (L/R)” (p206) (R only)
“4.4.2.6 Maintenance Tank (L/R)”
(p208) (R only)
“4.4.2.7 Right Cover” (p209)
“4.4.1.1 Unlocking the Carriage
Unit manually” (p201)
“4.4.6.2 Wiper Cleaner Assy”
(p269)
“4.4.6.1 Ink System Unit” (p266)
“4.4.4.8 PG HP Sensor” (p246)
“4.4.6.9 AID Board” (p294)
“4.4.6.5 Ink Cartridge Holder R”
(p277)
“4.4.6.13 Ink Tube L” (p310)
“4.4.2.4 IC Cover (L/R) & IC Shaft
Cover (L/R)” (p206)
“4.4.1.1 Unlocking the Carriage
Unit manually” (p201)
“4.4.2.1 Control Panel” (p203)
“4.4.2.7 Right Cover” (p209)
“4.4.2.8 Left Cover” (p211)
“4.4.2.10 Top Cover” (p214)
“4.4.6.3 Printhead” (p270)
“4.4.6.11 Ink Selector” (p300)
“4.4.2.6 Maintenance Tank (L/R)”
(p208) *
“4.4.6.10 Ink Mark Sensor” (p298)
“4.4.6.7 Ink Holder Board Assy L”
(p290)
“4.4.6.8 Ink Holder Board Assy R”
(p292)