Epson Stylus Pro 9900 - Page 198

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
DISASSEMBLY & ASSEMBLY Disassembly Flowchart 198
Confidential
PAPER FEED MECHANISM
NOTE * : Maintenance Tank L is only for Epson Stylus Pro 9700/9710/9900/9910/9890/9908.
START
“4.4.2.4 IC Cover (L/R) & IC Shaft
Cover (L/R)” (p206) (R only)
“4.4.5.8 PF Encoder Sensor”
(p263)
“4.4.5.5 Rewind Unit” (p255)
“4.4.2.1 Control Panel” (p203)
“4.4.2.6 Maintenance Tank (L/R)”
(p208) (R only)
“4.4.2.7 Right Cover” (p209)
“4.4.2.11 Spindle Cover R” (p215)
(R only)
“4.4.2.4 IC Cover (L/R) & IC Shaft
Cover (L/R)” (p206) (L only)
“4.4.2.6 Maintenance Tank (L/R)”
(p208) (L only)*
“4.4.2.8 Left Cover” (p211)
“4.4.5.9 PF Motor” (p264)
“4.4.2.4 IC Cover (L/R) & IC Shaft
Cover (L/R)” (p206)
“4.4.2.6 Maintenance Tank (L/R)”
(p208)*
“4.4.2.1 Control Panel” (p203)
“4.4.2.7 Right Cover” (p209)
“4.4.2.8 Left Cover” (p211)
“4.4.2.10 Top Cover” (p214)
“4.4.5.1 Paper Thickness Sensor”
(p250)
“4.4.5.7 Suction Fan” (p261)
“4.4.5.4 Roller Release HP Sensor”
(p254)
“4.4.5.6 Cutter Unit” (p257)
“4.4.1.1 Unlocking the Carriage
Unit manually” (p201)
“4.4.5.3 Driven Roller Release
Motor” (p253)
“4.4.2.15 Rear Cover” (p220)
“4.4.5.2 PW Sensor” (p251)
“4.4.1.1 Unlocking the Carriage
Unit manually” (p201)