Epson Stylus Pro 9900 - Other Adjustment; Setting Destination

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
ADJUSTMENT Other Adjustment 418
Confidential
5.7 Other Adjustment
5.7.1 Setting Destination
Save the destination to the Main Board.
PROCEDURE
1. Turn the printer ON in the Serviceman Mode.
Turn the power ON while pressing [Menu ] + [Paper Feed ] + [OK]
simultaneously.
2. Start the Service Program.
3. Select the Printer Name.
4. Click the [ADJUSTMENTS (Individual)].
5. Click the [Back].
6. Click the [Exit] to shut down the program.
7. Turn the printer OFF.
Figure 5-75. [Setting Destination] Screen
C A U T I O N
After clicking the [Exit] button, make sure to turn off the printer.
The destination setting becomes valid after the printer is restarted.
Step 4
Step 3
Step 6
Step 5