Epson Stylus Pro 9900 - Housing

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 203
Confidential
4.4.2 Housing
4.4.2.1 Control Panel
1. Insert a flathead screwdriver or a similar tool into the holes on both sides of the
Control Panel to unlock the two hooks, and detach the Control Panel.
2. Disconnect the FFC from the connector on the Control Panel.
Figure 4-14. Removing the Control Panel
Figure 4-15. Disconnecting the FFC
A D J U S T M E N T
R E Q U I R E D
Be sure to refer to Chapter 5 “Adjustment” (see p351) and perform
specified adjustments after replacing or removing the Control
Panel.
<Adjustment item>
1. Color LCD Display Check
2. Button Operation Check
Control Panel
Hooks
Control Panel
FFC