Epson Stylus Pro 9900 - Page 202

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 202
Confidential
4.4.1.2 Unlocking the IC Cover manually
1. Insert a piece of wire or the like into the hole shown in the figure.
2. Unlock the cover with it to open the IC Cover.
Figure 4-13. Unlocking the IC Cover manually
C H E C K
P O I N T
In the case that the IC Cover cannot be opened by the Control
Panel operation for some reasons, you can open the cover by the
following procedure.
Hole
IC Cover