Epson Stylus Pro 9900 - Tools for Adjustments

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
ADJUSTMENT Overview 357
Confidential
5.1.4 Tools for Adjustments
The table below shows the tools required for adjusting this printer.
Note *: Use when make test prints for adjustment.
Table 5-1. Tools for Adjustments
Type Name Part Number Remarks
Hard Tool
P-Thick Sensor Position Jig
1424364
Use the tool for
Epson Stylus
Pro7880/9880.
Paper Thickness Position Tool
1282355
Use the tool for
Epson Stylus
Pro4880.
Standard Sheet (JETRAS JP-D300S)
1476228 ---
Sonic Tension Meter U-507
1294120 ---
Thickness Gauge
(Thickness: 2.6 mm/2.7 mm)
---
Commercially
available
PG Height Adjustment Jig 1.55
1543007 ---
PG Height Adjustment Jig 1.65
1507506 ---
PG Height Adjustment Jig 1.75
1507277 ---
Cleaning PG Adjustment Jig
1507278 ---
INK LEAK CHECK CARTRIDGE
1493143 ---
High-precision ID adjustment tool
---
See p.393
Metal Ruler
---
Commercially
available
Ruler
---
Commercially
available
Can measure
1,000 mm
Specified Paper*
---
Refer to each
adjustment’s
description
Drain Cartridge
1500853 ---
Cleaning Cartridge, 200
1500854 ---
Software Service Program
---
Supplies