Epson Stylus Pro 9900 - Disassembly Flowchart

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
DISASSEMBLY & ASSEMBLY Disassembly Flowchart 195
Confidential
4.3 Disassembly Flowchart
CONSUMABLES/ACCESSORIES
HOUSING
NOTE * : Maintenance Tank L is only for Epson Stylus Pro 9700/9710/9900/9910/9890/9908.
“4.4.1.1 Unlocking the Carriage
Unit manually” (p201)
“4.4.1.2 Unlocking the IC Cover
manually” (p202)
“4.4.2.6 Maintenance Tank (L/R)”
(p208)
“4.4.7.1 Take-up Reel Cover”
(p313)
START
“4.4.2.1 Control Panel” (p203)
START
“4.4.2.14 Rear Left Cover” (p219)
“4.4.2.15 Rear Cover” (p220)
“4.4.2.4 IC Cover (L/R) & IC Shaft
Cover (L/R)” (p206) (L only)
“4.4.2.6 Maintenance Tank (L/R)”
(p208) (L only)*
“4.4.2.8 Left Cover” (p211)
“4.4.2.15 Rear Cover” (p220)
“4.4.2.4 IC Cover (L/R) & IC Shaft
Cover (L/R)” (p206) (R only)
“4.4.2.6 Maintenance Tank (L/R)”
(p208) (R only)
“4.4.2.7 Right Cover” (p209)
“4.4.2.11 Spindle Cover R” (p215)
“4.4.2.15 Rear Cover” (p220)
“4.4.6.5 Ink Cartridge Holder R”
(p277)
“4.4.2.18 Cartridge Cover Sensor
R” (p225)
“4.4.2.16 Front Cover Sensor R”
(p221)
“4.4.2.17 Front Cover Sensor L”
(p223)
“4.4.2.12 Spindle Cover L” (p216)
“4.4.2.13 Roll Cover Assy” (p217)
“4.4.2.19 Cartridge Cover Sensor
L” (p226)
“4.4.2.9 Front Cover (Middle)”
(p213)
“4.4.2.5 Front Cover (L/R)” (p207)
“4.4.2.3 IC Shaft Cover (L/R)”
(p205)
“4.4.2.6 Maintenance Tank (L/R)”
(p208)*
“4.4.2.1 Control Panel” (p203)
“4.4.2.7 Right Cover” (p209)
“4.4.2.8 Left Cover” (p211)
“4.4.2.10 Top Cover” (p214)
“4.4.2.2 IC Cover (L/R)” (p204)