Epson Stylus Pro 9900 - Page 196

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
DISASSEMBLY & ASSEMBLY Disassembly Flowchart 196
Confidential
ELECTRIC CIRCUIT COMPONENTS
NOTE * : Maintenance Tank L is only for Epson Stylus Pro 9700/9710/9900/9910/9890/9908.
START
“4.4.2.15 Rear Cover” (p220)
“4.4.2.1 Control Panel” (p203)
“4.4.2.4 IC Cover (L/R) & IC Shaft
Cover (L/R)” (p206)
“4.4.2.6 Maintenance Tank (L/R)”
(p208) *
“4.4.2.7 Right Cover” (p209)
“4.4.3.4 Sub Board Assy; B” (p233)
“4.4.2.4 IC Cover (L/R) & IC Shaft
Cover (L/R)” (p206) (L only)
“4.4.2.6 Maintenance Tank (L/R)”
(p208) (L only)*
“4.4.2.8 Left Cover” (p211)
“4.4.2.14 Rear Left Cover” (p219)
“4.4.3.5 Sub Board Assy; C” (p235)
“4.4.3.1 Main Board Assy” (p228) “4.4.3.2 Power Supply Board Assy”
(p230)
“4.4.3.3 Sub Board Assy” (p231)
“4.4.2.6 Maintenance Tank (L/R)”
(p208) *
“4.4.2.1 Control Panel” (p203)
“4.4.2.7 Right Cover” (p209)
“4.4.2.8 Left Cover” (p211)
“4.4.2.10 Top Cover” (p214)
“4.4.2.4 IC Cover (L/R) & IC Shaft
Cover (L/R)” (p206)
“4.4.1.1 Unlocking the Carriage
Unit manually” (p201)
“4.4.6.9 AID Board” (p294)