Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
ADJUSTMENT Head Related Adjustments 378
Confidential
5.4.4 Printhead Slant Adjustment (CR)
This allows you to adjust the Printhead angle in the CR direction.
PAPER USED
Size: 16 inches or more
Type: Premium Glossy Photo Paper (250)
PROCEDURE
1. Turn the printer ON in the Serviceman Mode.
Turn the power ON while pressing [Menu ] + [Paper Feed ] + [OK]
simultaneously.
2. Select SELF TESTING
→
Mecha Adjustment
→
CR Head Slant.
3. Press [OK] while [Enter] Print is displayed.
The adjustment pattern will be printed.
4. Check the visual check blocks in the adjustment pattern.
Check if lines of magenta and cyan are in line. If they are in line, finish the
adjustment. If not, follow steps below to carry out the adjustment.
NOTE: The pattern is for Epson Stylus Pro 7900/7910/9900/9910. The one for
Epson Stylus Pro 7700/7710/7700M/7710M/9700/9710, Epson Stylus Pro
9890/9908/7890/7908 differs in color.
Figure 5-30. Adjustment Pattern
Model Name : EPSON PX-HXXXX ,F/W Version : XXXXXXX
M/C No. : XXXXXXXXXXXXXXXXX ,RTC : XXXXXXXXXXXX ,Bk : Xx
Head-ID : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
USB-ID : XXXXXXXXXXXXXXXXXX
Visual Check Blocks
To Next Page
Loading...
