Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 237
Confidential
Attach the CR Scale with the cutout on the top right corner.
*Some 44-inch CR Scales do not have the notation of L/R.
Make sure to route the CR Scale between the detection part of
the CR Encoder Sensor on the rear of the carriage.
- Front Right -
Cutout
CR Scale
CR Scale
Detection part
CR Encoder Sensor
To Next Page
Loading...
