Epson Stylus Pro 9900 - Page 265

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 265
Confidential
8. Remove the two screws that secure the PF Motor, and remove the PF Motor from
the PF Motor Mounting Plate.
B) Silver, Phillips, Pan S-tite with S.W & P.W. M3x6: two pieces
Figure 4-106. Removing the PF Motor
A D J U S T M E N T
R E Q U I R E D
Be sure to refer to Chapter 5 “Adjustment” (see p351) and perform
specified adjustments after replacing or removing the PF Motor.
<Adjustment Item>
1. Counter Clear (PF Motor)
2. CR/PF Motor Current Input
3. PF Timing Belt Tension Adjustment
4. T&B&S Adjustment
B
- Left side -
PF Motor Mounting Plate
PF Motor