Epson Stylus Pro 9900 - Page 326

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 326
Confidential
3. Disconnect the mini USB interface cable and the DC cable connected to the Color
Measurement Device.
4. Hold the rear of the Color Measurement Device, and lift it forward slightly, then
remove it.
Figure 4-194. Disconnecting the cables (2)
Figure 4-195. Removing the Color Measurement Device
Mini USB interface cable
DC cable
SpectroProofer