Epson Stylus Pro 9900 - Page 328

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 328
Confidential
4.4.8.3 Right Cover
1. Remove the Color Measurement Device. (p325)
2. Remove the Mounter. (p327)
3. Remove the five screws that secure the Right Cover.
A) Black, Phillips, Bind P-tite M3x10: four pieces
B) Black, Phillips, Bind machine screw M3x6: one piece
4. Remove the Right Cover.
Figure 4-197. Removing the Right Cover
C H E C K
P O I N T
In the next procedure, one of the screws is different from the
others; therefore, make sure to confirm which is attached to which
location.
B
A
Right Cover