Epson Stylus Pro 9900 - Page 354

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
ADJUSTMENT Overview 354
Confidential
Note *1: Input the current value of CR/PF Motor if necessary. For necessity of this input, see “4.1.4 Cautions when replacing the Main Board Assy/Power Supply Board Assy (p171)”.
*2: The language setting of ASP's MAIN BOARD is English by default. Correct the LANGUAGE in Maintenance mode after setting the destination.
Ink System Mechanism INK SYSTEM UNIT 2 3 1
PRINTHEAD
6 3 2 4 7 8 9 10 11 12 5 1
PRESSURIZING UNIT
1
INK CARTRIDGE HOLDER (R&L)
3 2 1
INK HOLDER BOARD ASSY (R&L)
1
AID BOARD
2 3 1
INK MARK SENSOR
6 7 5 1 2 3 4
INK SELECTOR
1
INK TUBE (R&L)
2 1
Wiper Cleaner Assy
1
SpectroProofer
Main Board 1 2
Cooling Fan 1/2
1
Paper Pressing Motor
1
Carriage Motor
1
Class Parts
Tests
Adjustments
NVRAM Backup (P. 363) NVRAM Restore (P. 363)
CR Related
Adjustments
Head Related Adjustments PF Related Adjustments
AID Related Adj.
Other Adjustments
Network Communication Check (P. 428) Suction Fan Operation Check (P. 428) Color LCD Display Check (P. 429) Button Operation Check (P. 429) CR Timing Belt Tension Adj. (P. 364) CR Encoder Sensor Adj. (P. 368) Head PG Adjustment (P. 369) Cleaning PG Adjustment (P. 372) Head Rank ID (P. 374) Head Cleaning (P. 376) Nozzle Check (P. 377) Printhead Slant Adj. (CR) (P. 378) Printhead Slant Adj. (PF) (P. 381) Auto Uni-D Adjustment (P. 383) Auto Bi-D Adjustment (P. 384) Colorimetric Calibration (Color ID) (P. 385) Print Image (P. 360) Absorber Position Check (P. 398) Ink Mark Sensor Height Adj. (P. 399) Ink Mark Sensor Adj. (P. 400) Air Leak Check for Ink Supply Sys. (P. 401) Initial Ink Charge Flag ON/OFF (P. 403) PF Timing Belt Tension Adj. (P. 404) Skew Check (P. 406) Band Feed (P. 407) T&B&S Adjustment (P. 409) Paper Thickness Sensor Position Adj. (P. 411) PF Encoder Sensor Adj. (P. 414) Rear Sensor AD Adjustment (P. 415) AID Function Check (P. 416) Setting Destination (P. 418) CR/PF Motor Current Input (P. 419) RTC&USB ID (P. 420) Installing Firmware (P. 421) Input Serial Number (P. 423) Input MAC Address (P. 424) Cut Position Adjustment (P. 425) Ink Holder Adjustment (P. 426) Counter Clear (P. 427)