Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
ADJUSTMENT Overview 360
Confidential
FIRMWARE UPDATE TOOL
The utility for updating firmware is started up.
1. Highlight the target adjustment item and click [OK].
Figure 5-4. Firmware Update Tool
PRINT IMAGE
Image data can be printed for quality check.
NOTE: In the case of Epson Stylus Pro WT7900/WT7910, only the dedicated Prn
file can be printed.
When printing an image
1. Turn the printer ON in the Serviceman Mode. Turn the power on while pressing
[Menu ], [Paper Feed ] and [OK] button.
2. Start the Service Program and select PRINT IMAGE.
3. Click [Open] and select any one of the image files.
4. Click [Print] to print the selected image.
5. After checking the printed image, Click [Finish].
When printing the test pattern
1. Turn the printer ON in the Serviceman Mode. Turn the power on while pressing
[Menu ], [Paper Feed ] and [OK] button.
2. Start the Service Program and select PRINT IMAGE.
3. Click [TEST Print] to print the test pattern.
In the test pattern, the patterns for the following adjustments are printed.
Alignment Check pattern
Printhead Slant Adjustment (CR) pattern
Printhead Slant Adjustment (PF) pattern
Uni-D Check pattern
Bi-D Check pattern
Figure 5-5. Pint Image
To Next Page
Loading...
