Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
ADJUSTMENT Head Related Adjustments 380
Confidential
9. Turn the adjustment dial to adjust the slant of the Printhead.
Figure 5-33. Adjustment Dial
10. Tighten the screws (x6) loosened in Step 8.
11. Close the Front Cover (Middle).
12. Print the adjustment pattern again and check the adjustment result.
13. Repeat Step 4 to Step 12 till the adjustment is finished.
14. After finishing the adjustment, press [OK] while [Enter] Cap is displayed to cap
the Printhead. Then, turn the printer OFF and finish the adjustment.
C H E C K
P O I N T
See the following for the direction of rotation.
When turning the dial by 15 to 20 notches, the pattern slides up
or down by the line-height.
C line is below M line
Counterclockwise
C line is above M line
Clockwise
Paper Feed
Direction
Adjustment Dial
To Next Page
Loading...
