Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
ADJUSTMENT PF Related Adjustment 408
Confidential
6. Enter the following parameters that measured in Step 4 and press [OK].
Return to Step 2.
Epson Stylus Pro WT7900/WT7910
1. Turn the printer ON in the Serviceman Mode.
Turn the power ON while pressing [Menu ] + [Paper Feed ] + [OK]
simultaneously.
2. Select SELF TESTING
→
Mecha Adjustment
→
Feed Adj
→
Printing.
3. Press [OK] while [Enter] Print is displayed.
The adjustment pattern will be printed.
4. Measure the distance as shown in Figure 5-67.
Within the standard value: Turn the printer OFF and finish the adjustment.
Out of the range: Go to Step 5.
5. Select Feed Adj
→
Input.
6. Enter the following parameters that measured in Step 4 and press [OK].
Return to Step 2.
Figure 5-67. Adjustment Pattern
C A U T I O N
When measuring the value, make sure to put the adjustment
pattern on the horizontal surface.
Measuring
distance
Paper feeding direction
To Next Page
Loading...
