Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
ADJUSTMENT Other Adjustment 422
Confidential
3. Start the Service Program and select Firmware Update Tool.
Figure 5-79. [Firmware Update Tool] Screen
4. Click [Browse], and select a firmware data.
5. Click [Update] to transfer the firmware data.
6. When writing the firmware is completed, the printer should be rebooted.
7. Click [Exit].
C A U T I O N
When updating starts, a progress bar is displayed on the Control
Panel of the printer. After updating is complete, the printer restarts
automatically. Make sure not to turn off the printer until updating
is complete. Otherwise, the printer may not operate normally
afterward.
To Next Page
Loading...
