Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
MAINTENANCE Setting Up/Storing the Printer 448
Confidential
When storing the product for a long time, perform the cleaning of the ink path
following the procedure below.
THINGS TO PREPARE
Cleaning Cartridge
Drain Cartridge
PROCEDURE
1. Turn the printer ON in the Serviceman Mode.
Turn the power ON while pressing [Menu ] + [Paper Feed ] + [OK]
simultaneously.
2. Select SELF TESTING
→
Cleaning
→
ServicemanCL.
3. Replace the cartridges following the messages displayed on the Control Panel.
C H E C K
P O I N T
Cleaning of the ink path is made in the following procedure. For the
time required for each process, see the following (The required time
below is for Epson Stylus Pro 7900/7910/9900/9910):
1. Charging cleaning fluid
→
discharging it (approx. 20min.)
2. Charging cleaning fluid
→
discharging it (approx. 40min.)
For 1, cleaning fluid is charged/discharged to all the rows
simultaneously; for 2, it is charged/discharged to each row
respectively.
C A U T I O N
Make sure to use a brand-new Cleaning Cartridge and
Maintenance Tank R (at the home side).
C H E C K
P O I N T
After performing the cleaning, the initial charge flag is
automatically set. The next time turning the power on, the initial
ink charge sequence starts.
To Next Page
Loading...
