Epson Stylus Pro 9900 - Page 50

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
PRODUCT DESCRIPTION Control Panel 50
Confidential
8 [Paper Feed (forward)]
• When roll paper is loaded: Feeds the paper forward.
• When roll paper is not loaded: Does not function.
• While the Paper Presser is released: Decreases the power of the suction fan.
• When cut sheet is selected and a cut sheet is loaded on the printer: Feeds the
cut sheet to the print start position.
• When a cut sheet has been fed: Ejects the cut sheet.
• When roll paper is loaded: Feeds the roll paper forward at high speed.
• When roll paper is not loaded: Does not function.
Decreases the set
value.
9 [Paper Source]
• Changes the paper type when idling, waiting for the feeding trigger or when
such errors occurred as:
paper released error, front cover open error, paper cut error, paper skew error,
paper error (not detected), take-up error (sensor error), borderless error, paper
out error (roll paper), paper eject error, paper size error, paper setting error.
• Other than above: Does not function.
---
Goes back to the
previous item.
10 [Ink Cover Open]
• During printing/cleaning/charging initially/changing ink: Does not function.
• Other than above: Opens the ink cover.
--- ---
11 [Pause/Reset]
• When printing, idling, in the error status: Pauses the operation
• When displaying the menu screen: return to the previous screen from the
menu
• When displaying such screens as pausing, selection for opening IC Cover,
changing black ink, or cutting paper: return to the previous screen from the
sub menu
• When displaying the roll paper setting screen: return to the previous screen
from the roll paper setting screen
• Makes the printer recover from such errors as paper sensor error (barcode
detection failed), paper sensor error (wrong platen gap), cleaning error (not
enough ink), clogged nozzle error (not enough ink), cleaning error (auto head
cleaning failed).
• While the printer is in the idle state, switches between the copy mode and
print mode. *3
---
Stops the panel
settings.
Button Name
Function
When pressed normally When pressed down for 3 sec. For panel setting