79
Position number LCD message
3 Ready (optimum platen height)
Note: The positions above assume that the printed surface of the garment is the highest surface on the
platen. Seams, collars, zippers, pockets, and other raised areas will require a higher platen height and
result in reduced print quality.
Caution: Incorrect platen height settings cause excessive ink mist buildup inside the printer. If you
notice ink mist accumulating, adjust your platen height settings.
1. If the platen is not in the forward position, press the moveable base button to move the platen
forward.
2. Rotate the fixing lever beneath the platen as shown to loosen it.
To Next Page
Loading...
