Epson SureColor F2100 Series - Page 80

80
3. Rotate the height adjustment lever to adjust the height of the platen to one of these starting
positions:
• When printing on T-shirts using the large garment, medium garment, small garment, or extra small
garment platens with spacers a and b attached, select 3 on both spacers.
• When printing on T-shirts using the large garment, medium garment, small garment, or extra small
garment platens with spacers a and b attached and a grip pad attached, select 4 on both spacers.
• When printing on shirts using the sleeve platen or medium-grooved platen with spacer b attached,
select 3.