T3-B T6-B Maintenance 1. Safety Maintenance
T-B series Maintenance Manual Rev.1 3
1. Safety Maintenance
Please read this chapter, this manual, and other relevant manual carefully to understand safe
maintenance procedures before performing any maintenance.
Only personnel who has taken maintenance training held by us and suppliers should be
allowed to perform the maintenance of robot system.
1.1 Conventions
Important safety considerations are indicated throughout the manual by the following
symbols. Be sure to read the descriptions shown with each symbol.
WARNING
This symbol indicates that a danger of possible serious injury
or death exists if the associated instructions are not followed
properly.
WARNING
This symbol indicates that a danger of possible serious injury
or death caused by electric shock exists if the associated
instructions are not followed properly.
CAUTION
This symbol indicates that a danger of possible harm to people
or physical damage to equipment and facilities exists if the
associated instructions are not followed properly.