Epson T-B Series Maintenance Manual

T3-B T6-B Maintenance 7. Covers
T-B series Maintenance Manual Rev.1 43
7.6 Base Side Cover
CAUTION
■
Do not remove the base side cover forcibly. Unnecessary strain on cables may
result in damage to the cables, disconnection, and/or contact
failure.
■
When installing the base side cover, be careful not to allow the cables to interfere
with the plate mounting and do not bend these cables forcibly to push them into
the cover. Unnecessary strain on cables may result in damage to the cables,
di
sconnection, and/or contact failure. When routing the cables, observe the cable
locations after removing the cover. Be sure to place the cables back to their
original locations.
T3-B
4-M3×5 Hexagon socket head cap button bolt
Base Side Cover
Unscrew the base side cover mounting bolts, and then remove the base side cover.
T6-B
There is no base side cover.

NOTE

Epson T-B Series Specifications

General

Brand	Epson
Model	T-B Series
Category	Robotics
Language	English