T3-B T6-B Maintenance 7. Covers
42 T-B series Maintenance Manual Rev.1
7.5 Power Unit Cover
T3-B
Unscrew the power unit cover mounting bolts, and then remove the power unit cover.
Some fixed bolts are the same as power unit cover fixing bolts.
T6-B
8-M4×10 Binding head screws
Unscrew the power unit cover mounting bolts, and then remove the power unit cover.
After unscrewing the bolts, make sure to pull the power unit cover to the front of the robot
and remove it.
To Next Page
Loading...
