Epson T-B Series - Backup

T3-B T6-B Maintenance 5. Backup and Restore
22 T-B series Maintenance Manual Rev.1
5.3 Backup
Backup the Manipulator status from the EPSON RC+ 7.0.
(1) Select the EPSON RC+ 7.0 menu-[Tools]-[Controller] to display the [Controller Tools]
dialog box.
(2) Click the <View Controller Status> button to open the [Browse For Folder] dialog.
(3) Specify the folder to save the backup data. Create a new folder if desired.
(4) Click the <OK> button. A folder is created in the specified folder containing the backup
data with a name in the following format.
B_T_ serial number_ date status was saved
→ Example: B_T_12345_2016-04-03_092941
CAUTION
■
Do not edit the backup files.
Otherwise, operation of the robot system after data
restoration to the Manipulator is not assured.